The LoPy is the only triple bearer MicroPython enabled micro controller on the market today – perfect enterprise grade IoT platform for your connected Things. With the latest Espressif chipset the LoPy offers a perfect combination of power, friendliness and flexibility. Create and connect you things everywhere. Fast.
The LoPy can act as both a LoRa Nano Gateway and a multi-bearer (LoRa, WiFi and BLE) development platform. It is programmable with MicroPython and the Pymakr IDE for fast IoT application development, easy programming in-field and extra resilience with network failover. The best blend of speed to deployment and access to new LPWAN networks rolling out across Europe, USA, Africa and India.
The board ships with or without male headers mounted as seen on the pictures.
NOTE: Using the LoRa radio without the external antenna can lead to damage of the device and is therefore not recommended.
PLEASE NOTE: Pycom modules are powered by the NEW and FEATURE PACKED Espressif ESP32 chip. As a result our firmware is evolving constantly as the ESP32 IDF matures. Regular firmware updates are therefore provided.
เวปไซด์สินค้า: https://www.pycom.io/product/lopy/
LoPy Features
– Powerful CPU, BLE and state of the art WiFi radio. 1KM Wifi Range
– Can also double up as Nano LoRa gateway
– MicroPython enabled
– Fits in a standard breadboard (with headers)
– Ultra-low power usage: a fraction compared to other connected micro controllers
Processing
– Espressif ESP32 chipset
– Dual processor + WiFi radio System on chip
– Network processor handles the WiFi connectivity and the IPv6 stack
– Main processor is entirely free to run the user application
– An extra ELP-coprocessor that can monitor GPIOs, the ADC channels and control most of the internal peripherals during deep-sleep mode while only consuming 25uA
Operating Frequencies
– 868 MHz (Europe) at +14dBm maximum
– 915 MHz (North and South America, Australia and New Zealand) at +20dBm maximum
Range Specification
– Node range: Up to 40km
– Nano-gateway: Up to 22km
– Nano-gateway capacity: Up to 100 nodes
Interfaces
– 2 x UART, 2 x SPI, I2C, I2S, micro SD card
– Analog channels: 8×12 bit ADCs
– Timers: 4×16 bit with PWM and input capture
– DMA on all peripherals
– GPIO: Up to 24
Security & Certifications
– SSL/TLS support
– WPA Enterprise security
– FCC – 2AJMTLOPY2R
– CE 0700
Memory
– RAM: 512KB
– External flash: 4MB
– Hardware floating point acceleration
– Python multi-threading
Hash / encryption
SHA, MD5, DES, AES
WiFi
802.1b/g/n 16mbps
Bluetooth
Low energy and classic
RTC
Running at 32KHz
Power
– Input: 3.3V – 5.5V
– 3v3 output capable of sourcing up to 400mA
– WiFi: 12mA in active mode, 5uA in standby
– LoRa: 15mA in active mode, 1-uA in standby
LoRa Specification
– Semtech LoRa transceiver SX1272
– LoRaWAN stack
– Class A and C devices
Size
55mm x 20mm x 3.5mm (Without Headers)
Weight
– 7g
– 31g (Packaged)
– Powerful CPU, BLE and state of the art WiFi radio. 1KM Wifi Range
– Can also double up as Nano LoRa gateway
– MicroPython enabled
– Fits in a standard breadboard (with headers)
– Ultra-low power usage: a fraction compared to other connected micro controller